Best Inground Pool Covers: Winter, Safety, and Solar Covers Sized for In-Ground Pools

Our top pick is the WaterWarden Premium Pool Safety Cover for 12x20 Ft In-Ground Pool (best overall), because genuine weight-bearing barrier, not just a debris shieldand classified under ASTM F1346. The runner-up is the WaterWarden Solid Vinyl Pool Safety Cover, Fits 18x36 Ft Rectangle, followed by the GLI Secur-A-Pool 18x36 Ft Rectangular Mesh Safety Cover with Center End Step.

For most buyers, yes. It ranks #1 in our inground pool covers research, though requires a cover pump since rainwater and snowmelt pool on the solid surface.

Above-ground pool covers hook to the top rail of the pool wall using an elastic cable or winch-and-cable system, so the cover only needs to match the pool diameter plus a few inches of overlap. Inground pool covers anchor to the surrounding deck, which sits at ground level, so the cover has to extend well past the water's edge onto the coping and deck itself. Standard inground winter covers add a 4 to 5-foot overlap on every side (a 20x40 pool needs roughly a 25x45 cover), and safety covers are measured to the exact deck anchor points, which is why safety covers are far more often custom-fit than stock-sized. Buying an above-ground-style cover for an inground pool will leave gaps at the edges regardless of how it is anchored.

That depends entirely on who has access to the pool. If small children, pets, or anyone unable to swim can reach the pool area unsupervised, a winter tarp is not adequate protection, it is not weight-rated and can fail catastrophically under a person's weight, especially once pooled rainwater or snowmelt sits on top of it. Local and state codes in many areas require a compliant barrier (fence, cover, or both) around residential pools; an ASTM F1346-rated safety cover satisfies the cover portion of that requirement in jurisdictions that allow it. If the pool area is already fully fenced with a self-latching gate and unsupervised access isn't a realistic risk, a winter tarp is a reasonable and much cheaper choice for keeping debris and sun out during the off season.

Winter tarps: 3 to 10 years depending on gauge and UV exposure, with warranties from Robelle and similar brands scaling from 8-year to 20-year based on the scrim weight (heavier oz/yd2 fabric lasts longer and resists tearing from accumulated snow or ice). Mesh safety covers: 10 to 15 years is typical before the mesh weave degrades enough to reduce UV blockage and strength; the webbing and springs often need replacement sooner than the mesh itself. Solid safety covers: 12 to 20 years for the vinyl material, though grommets and anchor straps are wear items that get replaced along the way. Solar covers used on an inground pool during swim season see the shortest lifespan, 3 to 6 years, because UV and pool chemical exposure break down the bubble laminate faster than any other cover type.

Not effectively, and it isn't recommended as a year-round solution. A solar cover left on through winter in a freeze-prone climate can be damaged by ice forming on and around it, and it provides no protection against heavy snow load or debris the way a proper winter cover does. During active swim season, a solar cover on an inground pool works exactly the same as on an above-ground pool: it floats directly on the water and needs a reel or manual removal system sized for the larger surface area (inground rectangular solar covers 20x40 and up get heavy and are typically paired with an in-deck or above-deck reel rather than removed by hand).