Skip to content
BuyOnceRight: buy once, buy right
Wireless Chargers · Troubleshooting

Wireless Charger Not Working? 8 Fixes for iPhone, Samsung, and Android

Everything you need to know about wireless charger not working, 8 fixes for iphone, samsung, and android, explained plainly.

On this page
Step by step

How to fix it

Work through these in order, the most common causes come first.

  1. Power-cycle it properly

    Unplug (or remove batteries) for a full 60 seconds, not 5. This clears fault states that a quick toggle won't.

  2. Check the power path

    Try a different outlet, cable, and adapter. A surprising share of 'dead' devices are starved by a failing cable.

  3. Reset to factory defaults

    Look up the model's reset combination (usually holding a button 10+ seconds). Reconfigure from scratch afterward.

  4. Update firmware / app

    Check the companion app or manufacturer site for firmware updates that address known faults.

  5. Inspect for physical issues

    Look for debris, corrosion, loose parts, or swollen batteries before assuming electronics failure.

This guide covers wireless charger not working? 8 fixes for iphone, samsung, and android in practical detail. Browse the related guides below for deeper dives.

Put it into practice

Top wireless chargers we recommend

See all
Answers

Frequently asked questions

Why is my iPhone charging slowly on a MagSafe charger?

Three common causes: the power adapter is below 20W (see Fix 3), the iPhone is in Low Power Mode (which limits charging to 7.5W Qi speed even with MagSafe), or the phone is very warm. iPhones above 35°C (95°F) throttle wireless charging speed to prevent battery heat damage. Allow the phone to cool and move it off the charger temporarily. For Low Power Mode: go to Settings, Battery and turn off Low Power Mode before placing on the MagSafe charger.

Why does my Samsung phone charge slowly on a wireless charger?

Samsung Fast Wireless Charging requires a charger certified for Samsung Fast Wireless, generic Qi chargers charge Samsung phones at 5W or 7.5W, not 15W. Check that the charger specifies Samsung Fast Wireless Charging compatibility, not just Qi. Also verify the power adapter provides at least 15W, a 10W adapter limits Samsung fast wireless charging to 10W regardless of charger rating.

Can a wireless charger damage my phone battery?

Standard Qi, MagSafe, and Qi2 wireless charging are safe for phone batteries. All certified wireless chargers include overcharge protection and thermal management. Heat generation is the primary concern: wireless charging generates more heat than wired charging, and sustained heat above 40°C accelerates battery degradation slightly. For battery longevity: avoid leaving the phone on the wireless charger in direct sunlight or on a surface that traps heat (a thick foam pad, inside a case that does not dissipate heat). Using Apple's Optimized Battery Charging reduces the duration the battery spends at 100% charge and is the most effective battery longevity measure for overnight wireless charging.

Why does my wireless charger make a buzzing noise?

A buzzing or clicking noise from a wireless charger is coil whine, the electromagnetic coil vibrating at the charging frequency. This is normal and harmless at low volumes. Louder buzzing indicates the charger is having difficulty maintaining the connection, often because the phone is slightly misaligned with the coil. If buzzing continues when charging is indicated as connected, the charger's coil is vibrating against a loose internal component, contact the manufacturer for a replacement under warranty.

Keep researching

Related guides & best picks