Best High PressureLincoln Industrial
Lincoln Industrial 1160 Air-Operated High Pressure Gun
- 10,000 PSI rated
- Heavy duty
LILincoln
Lincoln
Lincoln 1320 Heavy Duty Air Gun
- Heavy duty fleet grade
- Lincoln quality
- Dual speed
Sponsored link · confirm price and availability on Amazon · updated
On this page
Is the Lincoln 1320 Heavy Duty Air Gun worth it?
Yes, for the right buyer. The Lincoln 1320 Heavy Duty Air Gun ranks #8 in our Best Pneumatic Grease Gun 2026 list (best fleet). Its biggest strength: professional durability. The main caveat: requires compressor.
Overview
What the Lincoln 1320 Heavy Duty Air Gun does well
Lincoln's 1320 is a heavy-duty air-operated grease gun designed for frequent shop use.
Specs that matter
Key features
- Heavy duty fleet grade
- Lincoln quality
- Dual speed
The trade-offs
Pros & cons
Pros
- Professional durability
- Continuous air operation
- Strong output
- Trusted brand
Cons
- Requires compressor
- Higher price
- Heavier
Fit check
Should you buy the Lincoln 1320 Heavy Duty Air Gun?
Think twice if this matters to you
- Requires compressor
- Higher price
- Heavier
Where it ranks
Featured in 1 best-of list
| List | Rank |
|---|---|
| Best Pneumatic Grease Gun 2026· Best Fleet | #8 / 10 |
Cross-shop
Alternatives to the Lincoln 1320 Heavy Duty Air Gun
Products ranked near it in our research, each better for a slightly different buyer.
Buying advice: grease guns
- Lever for power, pistol-grip for one-handed access, cordless for volume.
- Flexible hoses reach fittings behind wheels and under equipment.
- Locking couplers hold onto fittings and reduce leaks.
- 14 oz cartridges are standard. Check compatibility.
- A bleeder valve helps release trapped air when loading.
Read the full guides
Answers
Lincoln 1320 Heavy Duty Air Gun: common questions
Is the Lincoln 1320 Heavy Duty Air Gun worth buying?
Yes, for the right buyer. The Lincoln 1320 Heavy Duty Air Gun ranks #8 in our Best Pneumatic Grease Gun 2026 list (best fleet). Its biggest strength: professional durability. The main caveat: requires compressor.
Who is the Lincoln 1320 Heavy Duty Air Gun best for?
Based on our research it suits fleet and shop use. It's ranked #8 of 10 in our Best Pneumatic Grease Gun 2026 list.
What are the downsides of the Lincoln 1320 Heavy Duty Air Gun?
The main trade-offs owners and reviewers point to: requires compressor; higher price; heavier.
What are the key features of the Lincoln 1320 Heavy Duty Air Gun?
Heavy duty fleet grade, Lincoln quality and Dual speed.
What are the best alternatives to the Lincoln 1320 Heavy Duty Air Gun?
Worth comparing: Lincoln Industrial 1160 Air-Operated High Pressure Gun, Lumax LX-1632 Air-Powered Grease Gun and Legacy A1310 Pistol Grip Air Grease Gun. Each ranks near it in our research for a slightly different buyer.
Where can I buy the Lincoln 1320 Heavy Duty Air Gun?
It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.
How do I know how much grease to inject into a fitting?
Over-greasing is as damaging as under-greasing, excess pressure blows the grease seal and expels the grease that was protecting the bearing. For most automotive and light-equipment zerks: inject until you see fresh grease appear at the seal lip. Count the number of pumps and record it for future reference, a wheel bearing might take 3 pumps, a U-joint 1 pump. For fittings with a grease nipple that vents: pump until the vent releases. Do not force grease against resistance, if a zerk feels blocked, switch to a needle coupler and check the fitting before continuing.
What type of grease should I use?
NLGI grade 2 multipurpose lithium grease handles most automotive chassis, wheel bearing, and general purpose applications. For high-temperature applications (brake components, oven conveyor bearings): use a high-temp red grease rated for the operating temperature. For marine or wet environments: a water-resistant marine grease. For food-processing equipment: NSF H1-rated food-grade grease. Do not mix grease types, different base oils and thickeners are chemically incompatible and can break down lubrication properties. If switching grease types: purge the old grease fully before switching.