Skip to content
BuyOnceRight: buy once, buy right
Kreg KHCRA Automaxx Right Angle Clamp

Kreg

Kreg KHCRA Automaxx Right Angle Clamp

  • 90-degree clamping
  • Works with Kreg pocket hole jig
  • Micro-adjust jaw
  • Multiple size pieces
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the Kreg KHCRA Automaxx Right Angle Clamp worth it?

Yes, for the right buyer. The Kreg KHCRA Automaxx Right Angle Clamp ranks #7 in our Best Pocket Hole Jig 2026 list (best clamp). Its biggest strength: 90-degree jaw ensures square corners without a separate square during pocket hole assembly. The main caveat: designed specifically for Kreg/pocket hole workflow -- less useful for traditional joinery.

Overview

What the Kreg KHCRA Automaxx Right Angle Clamp does well

Best pocket hole clamp. What earns it a place here: holds the joint at the correct angle during screw driving -- prevents the joint from sliding and without a clamp, pocket hole joints slide out of alignment as the screw drives. The tradeoff: required for accurate work -- pocket hole joints without a clamp produce misaligned parts.

And compatible with Kreg pocket hole jig -- the combination speeds face frame assembly significantly. Keep in mind that designed specifically for Kreg/pocket hole workflow -- less useful for traditional joinery.

Specs that matter

Key features

  • 90-degree clamping
  • Works with Kreg pocket hole jig
  • Micro-adjust jaw
  • Multiple size pieces
The trade-offs

Pros & cons

Pros

  • 90-degree jaw ensures square corners without a separate square during pocket hole assembly
  • Compatible with Kreg pocket hole jig -- the combination speeds face frame assembly significantly
  • Micro-adjust jaw handles small size variations in workpiece thickness
  • Most practical right-angle clamp for cabinet and face frame assembly

Cons

  • Designed specifically for Kreg/pocket hole workflow -- less useful for traditional joinery
  • Maximum workpiece capacity limits to smaller frame members
Fit check

Should you buy the Kreg KHCRA Automaxx Right Angle Clamp?

Think twice if this matters to you

  • Designed specifically for Kreg/pocket hole workflow -- less useful for traditional joinery
  • Maximum workpiece capacity limits to smaller frame members
Where it ranks

Featured in 2 best-of lists

ListRank
Best Pocket Hole Jig 2026· Best Clamp#7 / 8
Best Woodworking Clamps 2026· Best Right Angle#8 / 8
Cross-shop

Alternatives to the Kreg KHCRA Automaxx Right Angle Clamp

Products ranked near it in our research, each better for a slightly different buyer.

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

Kreg KHCRA Automaxx Right Angle Clamp: common questions

Is the Kreg KHCRA Automaxx Right Angle Clamp worth buying?

Yes, for the right buyer. The Kreg KHCRA Automaxx Right Angle Clamp ranks #7 in our Best Pocket Hole Jig 2026 list (best clamp). Its biggest strength: 90-degree jaw ensures square corners without a separate square during pocket hole assembly. The main caveat: designed specifically for Kreg/pocket hole workflow -- less useful for traditional joinery.

What are the downsides of the Kreg KHCRA Automaxx Right Angle Clamp?

The main trade-offs owners and reviewers point to: designed specifically for Kreg/pocket hole workflow -- less useful for traditional joinery; maximum workpiece capacity limits to smaller frame members.

What are the key features of the Kreg KHCRA Automaxx Right Angle Clamp?

90-degree clamping, Works with Kreg pocket hole jig, Micro-adjust jaw and Multiple size pieces.

What are the best alternatives to the Kreg KHCRA Automaxx Right Angle Clamp?

Worth comparing: General Tools 850 E-Z Pro Deluxe Pocket Hole Jig Kit, Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count and Kreg KPCS Custom Pocket-Hole Plug Cutter. Each ranks near it in our research for a slightly different buyer.

Where can I buy the Kreg KHCRA Automaxx Right Angle Clamp?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research