Skip to content
BuyOnceRight: buy once, buy right
Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count

Kreg

Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count

  • Coarse thread
  • Self-tapping
  • Maxi-Loc head
  • Multiple lengths
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count worth it?

Yes, for the right buyer. The Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count ranks #5 in our Best Pocket Hole Jig 2026 list (best screws). Its biggest strength: coarse thread is the correct screw type for softwood and hardwood pocket hole joints in furniture. The main caveat: only sold in boxes of 50 to 500 -- no single-screw purchase.

Overview

What the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count does well

Best pocket hole screws. What earns it a place here: coarse thread is the correct screw type for softwood and hardwood pocket hole joints in furniture and maxi-Loc head design distributes load across a wider area than standard screw heads. The tradeoff: only sold in boxes of 50 to 500 -- no single-screw purchase.

Specs that matter

Key features

  • Coarse thread
  • Self-tapping
  • Maxi-Loc head
  • Multiple lengths
The trade-offs

Pros & cons

Pros

  • Coarse thread is the correct screw type for softwood and hardwood pocket hole joints in furniture
  • Maxi-Loc head design distributes load across a wider area than standard screw heads
  • Self-tapping point starts in the pocket hole without pilot drilling
  • Kreg screws are the reference product for their own jig system

Cons

  • Only sold in boxes of 50 to 500 -- no single-screw purchase
  • Coarse thread is not correct for sheet goods (use fine thread for plywood)
Fit check

Should you buy the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch?

Think twice if this matters to you

  • Only sold in boxes of 50 to 500 -- no single-screw purchase
  • Coarse thread is not correct for sheet goods (use fine thread for plywood)
Where it ranks

Featured in 1 best-of list

ListRank
Best Pocket Hole Jig 2026· Best Screws#5 / 8
Cross-shop

Alternatives to the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count

Products ranked near it in our research, each better for a slightly different buyer.

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count: common questions

Is the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count worth buying?

Yes, for the right buyer. The Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count ranks #5 in our Best Pocket Hole Jig 2026 list (best screws). Its biggest strength: coarse thread is the correct screw type for softwood and hardwood pocket hole joints in furniture. The main caveat: only sold in boxes of 50 to 500 -- no single-screw purchase.

What are the downsides of the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count?

The main trade-offs owners and reviewers point to: only sold in boxes of 50 to 500 -- no single-screw purchase; coarse thread is not correct for sheet goods (use fine thread for plywood).

What are the key features of the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count?

Coarse thread, Self-tapping, Maxi-Loc head and Multiple lengths.

What are the best alternatives to the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count?

Worth comparing: Kreg K5 Master System, Kreg Pocket-Hole Jig 720PRO and General Tools 850 E-Z Pro Deluxe Pocket Hole Jig Kit. Each ranks near it in our research for a slightly different buyer.

Where can I buy the Kreg Zinc Pocket-Hole Screws 1-1/4 Inch Coarse Thread Maxi-Loc Head, 100 Count?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research