GOGorilla
Gorilla
Gorilla Epoxy
- 5-minute set epoxy
- 3,300 PSI tensile
- Gap filling
- Syringe dispenser
Sponsored link · confirm price and availability on Amazon · updated
On this page
Is the Gorilla Epoxy worth it?
Yes, for the right buyer. The Gorilla Epoxy ranks #6 in our Best Glue for Plastic on Plastic 2026 list (best epoxy). Its biggest strength: syringe dispenser mixes resin and hardener at equal ratio automatically. The main caveat: 5-minute epoxy has lower final strength than 24-hour epoxy.
Specs that matter
Key features
- 5-minute set epoxy
- 3,300 PSI tensile
- Gap filling
- Syringe dispenser
The trade-offs
Pros & cons
Pros
- Syringe dispenser mixes resin and hardener at equal ratio automatically
- 5-minute working time with repositioning capability
- Works on plastic, metal, wood, and ceramic
Cons
- 5-minute epoxy has lower final strength than 24-hour epoxy
- Slightly hazy cure on transparent plastics
Fit check
Should you buy the Gorilla Epoxy?
Buy it if you're…
- Shopping for plastic on plastic 2026
Think twice if this matters to you
- 5-minute epoxy has lower final strength than 24-hour epoxy
- Slightly hazy cure on transparent plastics
Where it ranks
Featured in 1 best-of list
| List | Rank |
|---|---|
| Best Glue for Plastic on Plastic 2026· Best Epoxy | #6 / 11 |
Cross-shop
Alternatives to the Gorilla Epoxy
Products ranked near it in our research, each better for a slightly different buyer.
- Best For AcrylicWeld-On
Weld-On 16 Acrylic Adhesive
- Solvent cement for acrylic and plexiglass
- Near-invisible bond line
- Best VerticalLoctite
Loctite Ultra Gel Control Super Glue
- Side-squeeze applicator
- Rubber-toughened formula
Buying advice: adhesives
- Porous materials like wood, paper and fabric bond well with water-based glues. Non-porous ones like metal, glass and most plastics need epoxy, cyanoacrylate or a polyurethane adhesive. Polyethylene and polypropylene resist almost everything, so check the label lists them.
- Thin glues need parts that meet closely. If the joint is loose or the surfaces are uneven, epoxy or polyurethane glue fills the gap and still holds.
- Fast-setting glue is convenient for small fixes but leaves no time to adjust a big assembly. For furniture and glue-ups, a longer open time is worth more than speed.
- Standard PVA softens with moisture. For outdoor projects, cutting boards or anything washed often, look for a water-resistant (Type II) or waterproof (Type I) rating, or use epoxy.
- Once opened, super glue and some epoxies thicken within months. Smaller bottles that you finish quickly often work out cheaper than a big one that goes off.
Answers
Gorilla Epoxy: common questions
Is the Gorilla Epoxy worth buying?
Yes, for the right buyer. The Gorilla Epoxy ranks #6 in our Best Glue for Plastic on Plastic 2026 list (best epoxy). Its biggest strength: syringe dispenser mixes resin and hardener at equal ratio automatically. The main caveat: 5-minute epoxy has lower final strength than 24-hour epoxy.
Who is the Gorilla Epoxy best for?
Based on our research it suits plastic on plastic 2026. It's ranked #6 of 11 in our Best Glue for Plastic on Plastic 2026 list.
What are the downsides of the Gorilla Epoxy?
The main trade-offs owners and reviewers point to: 5-minute epoxy has lower final strength than 24-hour epoxy; slightly hazy cure on transparent plastics.
What are the key features of the Gorilla Epoxy?
5-minute set epoxy, 3,300 PSI tensile, Gap filling and Syringe dispenser.
What are the best alternatives to the Gorilla Epoxy?
Worth comparing: Permatex 84145 Plastic Welder, Weld-On 16 Acrylic Adhesive and Loctite Ultra Gel Control Super Glue. Each ranks near it in our research for a slightly different buyer.
Where can I buy the Gorilla Epoxy?
It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.