Extang Trifecta 2.0 Tonneau Cover Review

The Case for Folding Over Roll-Up

The Trifecta 2.0's selling point is partial bed access, and for certain truck uses, this is significant.

Lumber and long materials: an 8-foot board that extends past the tailgate on a 5.5-foot bed needs the tailgate down and open.

With a roll-up cover: open the full cover, lower the tailgate, load the board.

With the Trifecta: fold back the rear panel, lower the tailgate, slide the board in.

Panel Construction

Each of the three panels is an aluminum frame covered in UV-resistant vinyl.

The aluminum frame serves two functions: it gives the cover enough rigidity to resist wind buffeting at highway speeds (the TruXport's flexible vinyl flaps audibly at 65+ mph in some configurations), and it provides the rated snow load capacity.

The 180 lb snow load rating means the panels can bear typical accumulated snow weight without deforming.

The cover should still be cleared of heavy snow accumulation, the rating is for incidental snow load, not sustained ice sheet weight.

Sealing

The Trifecta 2.0 has foam seals on all four panel edges (front, rear, and both sides) plus the panel-to-panel joints.

Water entry in normal rain is minimal, less than the TruXport under equivalent conditions.

The panel-to-panel seam is the most vulnerable point.

Inspect these seals annually and apply rubber conditioner to maintain flexibility.

Installation

First installation: 50 minutes.

Tools required: none, clamp-style installation.

The side rails clamp to the bed rail, the three panels hinge together and attach to the rails.

The clamp positions for the 5'7" bed size require precise measurement, the cover must sit square to the tailgate.

Long-Term Durability

The aluminum frame eliminates the tension loss that affects soft roll-up covers over time.

The frame maintains its shape without adjustment.

The vinyl covering has the same UV degradation timeline as roll-up covers: apply 303 Aerospace Protectant twice yearly.

Hinge points: inspect annually for corrosion on the hinge pins.

For the Full Comparison

The Trifecta 2.0 vs TruXport decision comes down to: do you need partial bed access?

If full-open or full-closed is all you need: TruXport.

See roll-up vs folding tonneau cover for the full comparison.

Best Tonneau Covers: Top Picks for Every Truck Bed and BudgetTonneau Covers · List How to Install a Tonneau Cover: Tools, Steps, and Fitment IssuesTonneau Covers · Guide Our editorial team researches and writes every review independently.