WEN
WEN 61764 16-Gauge Pneumatic Straight Finish Nailer
- 16-gauge
- Includes carrying case
- Quick-release nose
- Sequential and single-fire modes
Sponsored link · confirm price and availability on Amazon · updated
On this page
Is the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer worth it?
Yes, for the right buyer. The WEN 61764 16-Gauge Pneumatic Straight Finish Nailer ranks #5 in our Best Finish Nailer 2026 list (best value pneumatic). Its biggest strength: the lowest price 16-gauge finish nailer with a carrying case included. The main caveat: less refined build quality than DeWalt or Bostitch on thick hardwood trim.
What the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer does well
Best budget pneumatic finish nailer. Its case rests on the lowest price 16-gauge finish nailer with a carrying case included and quick-release nose clears jams without extra tools. Keep in mind that less refined build quality than DeWalt or Bostitch on thick hardwood trim.
Key features
- 16-gauge
- Includes carrying case
- Quick-release nose
- Sequential and single-fire modes
Pros & cons
Pros
- The lowest price 16-gauge finish nailer with a carrying case included
- Quick-release nose clears jams without extra tools
- Adequate driving power for standard trim work
- The correct budget pneumatic finish nailer for homeowners doing their own trim
Cons
- Less refined build quality than DeWalt or Bostitch on thick hardwood trim
- Requires an air compressor
Should you buy the WEN 61764 16-Gauge Pneumatic Straight Finish?
Think twice if this matters to you
- Less refined build quality than DeWalt or Bostitch on thick hardwood trim
- Requires an air compressor
Featured in 1 best-of list
| List | Rank |
|---|---|
| Best Finish Nailer 2026· Best Value Pneumatic | #5 / 8 |
Alternatives to the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer
Products ranked near it in our research, each better for a slightly different buyer.
- Best Fuel CordlessPaslode
Paslode Cordless 16-Gauge Angled Finish Nailer (900600)
- Fuel cell and battery powered
- 16-gauge
- Best AngledMetabo HPT
Metabo HPT NT65MA4 15-Gauge Angled Finish Nailer
- Angled magazine
- 20-34 degree magazine
Buying advice: woodworking
- Clamps, a combination square, a good saw and a drill cover most beginner projects.
- You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
- Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
- Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
- Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.
Read the full guides
- Building a Cabinet
- How to Sharpen Chisels
- Wood Finishing Guide 2026
- Wood Joinery Guide
- Wood Movement
- Can You Paint Over Danish Oil? What Works and What Fails
- Can You Put Polyurethane Over Tung Oil? How to Do It Without Failure
- Can You Stain Over Danish Oil? What Actually Works
- Can You Wax Over Danish Oil? How to Layer Wax and Oil Finishes
- Does Linseed Oil Go Bad? Shelf Life and How to Tell if It Has Spoiled
- Does Linseed Oil Smell? What It Smells Like and How Long It Lasts
- Is Linseed Oil Flammable? What Woodworkers Need to Know About Safe Disposal
- Is Linseed Oil Toxic? Safety Guide for Raw and Boiled Linseed Oil
- What Is in Danish Oil? Ingredients, Formulation, and What You're Actually Buying
WEN 61764 16-Gauge Pneumatic Straight Finish Nailer: common questions
Is the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer worth buying?
Yes, for the right buyer. The WEN 61764 16-Gauge Pneumatic Straight Finish Nailer ranks #5 in our Best Finish Nailer 2026 list (best value pneumatic). Its biggest strength: the lowest price 16-gauge finish nailer with a carrying case included. The main caveat: less refined build quality than DeWalt or Bostitch on thick hardwood trim.
Who is the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer best for?
Based on our research it suits value-focused buyers who want the most for their money. It's ranked #5 of 8 in our Best Finish Nailer 2026 list.
What are the downsides of the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer?
The main trade-offs owners and reviewers point to: less refined build quality than DeWalt or Bostitch on thick hardwood trim; requires an air compressor.
What are the key features of the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer?
16-gauge, Includes carrying case, Quick-release nose and Sequential and single-fire modes.
What are the best alternatives to the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer?
Worth comparing: BOSTITCH N62FNK2 15-Gauge Angled Finish Nailer, Paslode Cordless 16-Gauge Angled Finish Nailer (900600) and Metabo HPT NT65MA4 15-Gauge Angled Finish Nailer. Each ranks near it in our research for a slightly different buyer.
Where can I buy the WEN 61764 16-Gauge Pneumatic Straight Finish Nailer?
It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.
More woodworking shortlists
- Best 90 Degree Wood Clamp 2026
- Best Glue for Wood to Concrete 2026
- Best Band Saws 2026
- Best Bandsaw Blades for Woodworking 2026
- Best Beginner Wood Lathe 2026
- Best Bench Clamps for Woodworking 2026
- Best Bench Vise 2026
- Best Biscuit Joiner 2026
- Best Brad Nailer 2026
- Best CA Glue for Woodworking 2026
- Best Cabinet Table Saw 2026
- Best Card Scraper 2026
- Best Carving Tools for Beginners 2026
- Best Chisel Sharpening Kit 2026
Other woodworking we recommend
- Best DeltaDelta
Delta Industrial 46-460 12-1/2-Inch Variable-Speed MIDI Lathe
- 12-1/2-inch swing
- 16-1/2-inch between centers
- Best OverallDEWALT
DEWALT 12 Inch Double Bevel Sliding Compound Miter Saw (DWS779)
- 15-amp motor
- 12-inch blade
- Best OverallDEWALT
DEWALT 15 Amp 8-1/4 Inch Compact Portable Jobsite Table Saw DWE7485
- 15-amp motor with 24.5-inch rip capacity
- Rack and pinion telescoping fence
- Best Bench SetDEWALT
DEWALT DWHT16063 4-Piece Short Blade Wood Chisel Set
- Set includes 1/4, 1/2, 3/4, and 1-inch chisels
- Chrome carbon steel blades






