Skip to content
BuyOnceRight: buy once, buy right
POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack

POWERTEC

POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack

  • Two holdfasts for holding stock at both ends
  • Fits 3/4-inch bench dog holes
  • Tested on bench tops from 1.5 to 3 inches thick
  • Grey powder-coated finish
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack worth it?

Yes, for the right buyer. The POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack ranks #5 in our Best Bench Clamps for Woodworking 2026 list (best holdfast pair). Its biggest strength: two holdfasts let you secure both ends of a long board simultaneously. The main caveat: still requires drilled 3/4-inch dog holes at the right spacing for both holdfasts.

Overview

What the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack does well

Best holdfast two-pack. It stands out for two holdfasts let you secure both ends of a long board simultaneously and works across a wider range of bench top thicknesses than most single holdfasts. One caveat, still requires drilled 3/4-inch dog holes at the right spacing for both holdfasts.

Specs that matter

Key features

  • Two holdfasts for holding stock at both ends
  • Fits 3/4-inch bench dog holes
  • Tested on bench tops from 1.5 to 3 inches thick
  • Grey powder-coated finish
The trade-offs

Pros & cons

Pros

  • Two holdfasts let you secure both ends of a long board simultaneously
  • Works across a wider range of bench top thicknesses than most single holdfasts
  • Same fast mallet-set, mallet-release action as a single holdfast
  • Buying a matched pair costs less per unit than two single holdfasts

Cons

  • Still requires drilled 3/4-inch dog holes at the right spacing for both holdfasts
  • Thin bench tops reduce holding force
Fit check

Should you buy the POWERTEC 71528 8-Inch Workbench Holdfast?

Buy it if you're…

  • Shopping for woodworking 2026

Think twice if this matters to you

  • Still requires drilled 3/4-inch dog holes at the right spacing for both holdfasts
  • Thin bench tops reduce holding force
Where it ranks

Featured in 1 best-of list

ListRank
Best Bench Clamps for Woodworking 2026· Best Holdfast Pair#5 / 8
Cross-shop

Alternatives to the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack

Products ranked near it in our research, each better for a slightly different buyer.

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack: common questions

Is the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack worth buying?

Yes, for the right buyer. The POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack ranks #5 in our Best Bench Clamps for Woodworking 2026 list (best holdfast pair). Its biggest strength: two holdfasts let you secure both ends of a long board simultaneously. The main caveat: still requires drilled 3/4-inch dog holes at the right spacing for both holdfasts.

Who is the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack best for?

Based on our research it suits woodworking 2026. It's ranked #5 of 8 in our Best Bench Clamps for Woodworking 2026 list.

What are the downsides of the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack?

The main trade-offs owners and reviewers point to: still requires drilled 3/4-inch dog holes at the right spacing for both holdfasts; thin bench tops reduce holding force.

What are the key features of the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack?

Two holdfasts for holding stock at both ends, Fits 3/4-inch bench dog holes, Tested on bench tops from 1.5 to 3 inches thick and Grey powder-coated finish.

What are the best alternatives to the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack?

Worth comparing: POWERTEC 71466 Bench Dog Clamps, 3/4-Inch Dog Hole (2-Pack), POWERTEC 71467 Solid Steel Bench Dog and Rockler Bench Cookie Work Grippers, 4-Pack. Each ranks near it in our research for a slightly different buyer.

Where can I buy the POWERTEC 71528 8-Inch Workbench Holdfast, 2-Pack?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research