Skip to content
BuyOnceRight: buy once, buy right
JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp

Jorgensen

JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp

  • 72-inch jaw spread for full tabletops
  • 90-degree parallel jaw alignment, no rocking
  • Large plastic jaws distribute pressure over a wide area
  • Built-in clamp stand for one-handed use
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp worth it?

Yes, for the right buyer. The JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp ranks #8 in our Best Panel Clamps for Woodworking 2026 list (best large panel). Its biggest strength: 72-inch spread handles full-size tabletops and door panels in a single clamp. The main caveat: lower maximum clamping force than the Bessey K Body REVO.

Overview

What the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp does well

And parallel jaw alignment stays at 90 degrees to the bar, eliminates the rocking that causes bowing in wide panels. Keep in mind that lower maximum clamping force than the Bessey K Body REVO.

Specs that matter

Key features

  • 72-inch jaw spread for full tabletops
  • 90-degree parallel jaw alignment, no rocking
  • Large plastic jaws distribute pressure over a wide area
  • Built-in clamp stand for one-handed use
The trade-offs

Pros & cons

Pros

  • 72-inch spread handles full-size tabletops and door panels in a single clamp
  • Parallel jaw alignment stays at 90 degrees to the bar, eliminates the rocking that causes bowing in wide panels
  • Built-in stand keeps the clamp stable on the bench during setup without an assistant
  • Large plastic jaw faces distribute pressure over a wide area, reducing the need for cauls

Cons

  • Lower maximum clamping force than the Bessey K Body REVO
  • Long 72-inch bar is unwieldy to store and transport
Fit check

Should you buy the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree?

Buy it if you're…

  • Shopping for woodworking 2026

Think twice if this matters to you

  • Lower maximum clamping force than the Bessey K Body REVO
  • Long 72-inch bar is unwieldy to store and transport
Where it ranks

Featured in 1 best-of list

ListRank
Best Panel Clamps for Woodworking 2026· Best Large Panel#8 / 8
Cross-shop

Alternatives to the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp

Products ranked near it in our research, each better for a slightly different buyer.

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp: common questions

Is the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp worth buying?

Yes, for the right buyer. The JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp ranks #8 in our Best Panel Clamps for Woodworking 2026 list (best large panel). Its biggest strength: 72-inch spread handles full-size tabletops and door panels in a single clamp. The main caveat: lower maximum clamping force than the Bessey K Body REVO.

Who is the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp best for?

Based on our research it suits woodworking 2026. It's ranked #8 of 8 in our Best Panel Clamps for Woodworking 2026 list.

What are the downsides of the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp?

The main trade-offs owners and reviewers point to: lower maximum clamping force than the Bessey K Body REVO; long 72-inch bar is unwieldy to store and transport.

What are the key features of the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp?

72-inch jaw spread for full tabletops, 90-degree parallel jaw alignment, no rocking, Large plastic jaws distribute pressure over a wide area and Built-in clamp stand for one-handed use.

What are the best alternatives to the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp?

Worth comparing: Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, TEKTON 39184 24-Inch Ratchet Bar Clamp / 30-Inch Spreader and POWERTEC Strap Clamps for Woodworking, 13 ft Band Clamp (71101). Each ranks near it in our research for a slightly different buyer.

Where can I buy the JORGENSEN 8072 Cabinet Master 72-Inch 90-Degree Parallel Jaw Bar Clamp?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research