Skip to content
BuyOnceRight: buy once, buy right
JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp

Jorgensen

JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp

  • Patented clamping head with 90-degree alignment
  • No rocking, stable on flat surfaces
  • I-beam bar construction
  • Non-marring pads
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp worth it?

Yes, for the right buyer. The JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp ranks #3 in our Best Panel Clamps for Woodworking 2026 list (best cabinet). Its biggest strength: patented head design keeps the jaw at 90 degrees to the bar, eliminates the rocking that causes bowing in panels. The main caveat: heavy compared to aluminum bar clamps.

Overview

What the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp does well

Best cabinet maker's bar clamp. What earns it a place here: patented head design keeps the jaw at 90 degrees to the bar, eliminates the rocking that causes bowing in panels and i-beam bar is stiffer than flat bar designs, less deflection under load. Keep in mind that heavy compared to aluminum bar clamps.

Specs that matter

Key features

  • Patented clamping head with 90-degree alignment
  • No rocking, stable on flat surfaces
  • I-beam bar construction
  • Non-marring pads
The trade-offs

Pros & cons

Pros

  • Patented head design keeps the jaw at 90 degrees to the bar, eliminates the rocking that causes bowing in panels
  • I-beam bar is stiffer than flat bar designs, less deflection under load
  • Stable flat on the bench, does not tip over during setup
  • Non-marring pads protect finished and softwood surfaces

Cons

  • Heavy compared to aluminum bar clamps
  • Maximum jaw spread limited to 36 inches on this bar length, longer bars sold separately
Fit check

Should you buy the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree?

Buy it if you're…

  • Shopping for woodworking 2026

Think twice if this matters to you

  • Heavy compared to aluminum bar clamps
  • Maximum jaw spread limited to 36 inches on this bar length, longer bars sold separately
Where it ranks

Featured in 1 best-of list

ListRank
Best Panel Clamps for Woodworking 2026· Best Cabinet#3 / 8
Cross-shop

Alternatives to the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp

Products ranked near it in our research, each better for a slightly different buyer.

Head-to-head

Compared with

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp: common questions

Is the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp worth buying?

Yes, for the right buyer. The JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp ranks #3 in our Best Panel Clamps for Woodworking 2026 list (best cabinet). Its biggest strength: patented head design keeps the jaw at 90 degrees to the bar, eliminates the rocking that causes bowing in panels. The main caveat: heavy compared to aluminum bar clamps.

Who is the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp best for?

Based on our research it suits woodworking 2026. It's ranked #3 of 8 in our Best Panel Clamps for Woodworking 2026 list.

What are the downsides of the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp?

The main trade-offs owners and reviewers point to: heavy compared to aluminum bar clamps; maximum jaw spread limited to 36 inches on this bar length, longer bars sold separately.

What are the key features of the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp?

Patented clamping head with 90-degree alignment, No rocking, stable on flat surfaces, I-beam bar construction and Non-marring pads.

What are the best alternatives to the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp?

Worth comparing: Bessey KR3.550 50-Inch K Body REVO Parallel Bar Clamp (2-Pack), IRWIN QUICK-GRIP One-Handed Bar Clamp, Medium-Duty, 36-Inch and Pony 50 Clamp Fixture for 3/4-Inch Black Pipe. Each ranks near it in our research for a slightly different buyer.

Where can I buy the JORGENSEN 8036 Cabinet Master 36-Inch 90-Degree Parallel Steel Bar Clamp?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research