Skip to content
BuyOnceRight: buy once, buy right
Freud 75-100 Up Spiral Bit, 1/8-Inch

Freud

Freud 75-100 Up Spiral Bit, 1/8-Inch

  • Spiral up-cut geometry
  • Center-cutting end
  • TiCo carbide
  • 1/4-inch shank
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the Freud 75-100 Up Spiral Bit, 1/8-Inch worth it?

Yes, for the right buyer. The Freud 75-100 Up Spiral Bit, 1/8-Inch ranks #1 in our Best Plunge Router Bits 2026 list (best overall). Its biggest strength: center-cutting end allows plunging directly into the surface without a pilot hole. The main caveat: up-cut spiral pulls chips upward -- some chip ejection onto the workpiece surface.

Overview

What the Freud 75-100 Up Spiral Bit, 1/8-Inch does well

Best overall plunge router bit. What earns it a place here: center-cutting end allows plunging directly into the surface without a pilot hole and spiral up-cut geometry produces a shearing action that dramatically reduces tearout. Keep in mind that up-cut spiral pulls chips upward -- some chip ejection onto the workpiece surface.

Specs that matter

Key features

  • Spiral up-cut geometry
  • Center-cutting end
  • TiCo carbide
  • 1/4-inch shank
The trade-offs

Pros & cons

Pros

  • Center-cutting end allows plunging directly into the surface without a pilot hole
  • Spiral up-cut geometry produces a shearing action that dramatically reduces tearout
  • TiCo carbide stays sharp longer than standard carbide in repeated plunge cuts
  • The most commonly recommended plunge bit for stopped grooves and mortises

Cons

  • Up-cut spiral pulls chips upward -- some chip ejection onto the workpiece surface
  • Higher price than standard straight plunge bits
Fit check

Should you buy the Freud 75-100 Up Spiral Bit?

Think twice if this matters to you

  • Up-cut spiral pulls chips upward -- some chip ejection onto the workpiece surface
  • Higher price than standard straight plunge bits
Where it ranks

Featured in 1 best-of list

ListRank
Best Plunge Router Bits 2026· Best Overall#1 / 8
Cross-shop

Alternatives to the Freud 75-100 Up Spiral Bit, 1/8-Inch

Products ranked near it in our research, each better for a slightly different buyer.

Head-to-head

Compared with

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

Freud 75-100 Up Spiral Bit, 1/8-Inch: common questions

Is the Freud 75-100 Up Spiral Bit, 1/8-Inch worth buying?

Yes, for the right buyer. The Freud 75-100 Up Spiral Bit, 1/8-Inch ranks #1 in our Best Plunge Router Bits 2026 list (best overall). Its biggest strength: center-cutting end allows plunging directly into the surface without a pilot hole. The main caveat: up-cut spiral pulls chips upward -- some chip ejection onto the workpiece surface.

Who is the Freud 75-100 Up Spiral Bit, 1/8-Inch best for?

Based on our research it suits buyers who want the best overall package. It's ranked #1 of 8 in our Best Plunge Router Bits 2026 list.

What are the downsides of the Freud 75-100 Up Spiral Bit, 1/8-Inch?

The main trade-offs owners and reviewers point to: up-cut spiral pulls chips upward -- some chip ejection onto the workpiece surface; higher price than standard straight plunge bits.

What are the key features of the Freud 75-100 Up Spiral Bit, 1/8-Inch?

Spiral up-cut geometry, Center-cutting end, TiCo carbide and 1/4-inch shank.

What are the best alternatives to the Freud 75-100 Up Spiral Bit, 1/8-Inch?

Worth comparing: Freud 76-102 Down Spiral Bit, 1/4-Inch, Freud 75-103 Up Spiral Bit, 1/4-Inch and YONICO 14320 CNC End Mill Solid Carbide Up Cut Set, 3 Bit. Each ranks near it in our research for a slightly different buyer.

Where can I buy the Freud 75-100 Up Spiral Bit, 1/8-Inch?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research