Skip to content
BuyOnceRight: buy once, buy right
Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit

Freud

Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit

  • Top and bottom bearings
  • 1-5/8-inch carbide height
  • 1/2-inch shank
  • TiCo Hi-Density carbide
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit worth it?

Yes, for the right buyer. The Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit ranks #2 in our Best Flush Trim Router Bit 2026 list (best double bearing). Its biggest strength: top and bottom bearings allow routing with the template above or below the workpiece without changing bits. The main caveat: higher price than single-bearing bits.

Overview

What the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit does well

Best double-bearing flush trim bit. What earns it a place here: top and bottom bearings allow routing with the template above or below the workpiece without changing bits and tall carbide height handles thick stock in a single pass. The tradeoff: higher price than single-bearing bits.

Specs that matter

Key features

  • Top and bottom bearings
  • 1-5/8-inch carbide height
  • 1/2-inch shank
  • TiCo Hi-Density carbide
The trade-offs

Pros & cons

Pros

  • Top and bottom bearings allow routing with the template above or below the workpiece without changing bits
  • Tall carbide height handles thick stock in a single pass
  • Freud's TiCo carbide formulation stays sharp longer than standard carbide
  • 1/2-inch shank for use in full-size router table setups

Cons

  • Higher price than single-bearing bits
  • More weight from double bearings requires slightly more care at high speed
Fit check

Should you buy the Freud 50-509 3/4-Inch Top & Bottom?

Think twice if this matters to you

  • Higher price than single-bearing bits
  • More weight from double bearings requires slightly more care at high speed
Where it ranks

Featured in 1 best-of list

ListRank
Best Flush Trim Router Bit 2026· Best Double Bearing#2 / 8
Cross-shop

Alternatives to the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit

Products ranked near it in our research, each better for a slightly different buyer.

Head-to-head

Compared with

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit: common questions

Is the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit worth buying?

Yes, for the right buyer. The Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit ranks #2 in our Best Flush Trim Router Bit 2026 list (best double bearing). Its biggest strength: top and bottom bearings allow routing with the template above or below the workpiece without changing bits. The main caveat: higher price than single-bearing bits.

What are the downsides of the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit?

The main trade-offs owners and reviewers point to: higher price than single-bearing bits; more weight from double bearings requires slightly more care at high speed.

What are the key features of the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit?

Top and bottom bearings, 1-5/8-inch carbide height, 1/2-inch shank and TiCo Hi-Density carbide.

What are the best alternatives to the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit?

Worth comparing: Freud 50-102 1/2-Inch Top Bearing Flush Trim Bit, Bosch 85266MC 1/2-Inch x 1-Inch Carbide-Tipped Flush Trim Router Bit and Amana Tool MR0102 Miniature Flush Trim Bit. Each ranks near it in our research for a slightly different buyer.

Where can I buy the Freud 50-509 3/4-Inch Top & Bottom Bearing Flush Trim Bit?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research