Skip to content
BuyOnceRight: buy once, buy right
Freud 34-114 3/8-Inch Radius Rounding Over Bit

Freud

Freud 34-114 3/8-Inch Radius Rounding Over Bit

  • 3/8-inch radius
  • Micro-grain carbide
  • Bottom bearing
  • For tabletops and large edges
Check price on Amazon

Sponsored link · confirm price and availability on Amazon · updated

On this page

Is the Freud 34-114 3/8-Inch Radius Rounding Over Bit worth it?

Yes, for the right buyer. The Freud 34-114 3/8-Inch Radius Rounding Over Bit ranks #4 in our Best Roundover Router Bit 2026 list (best large radius). Its biggest strength: 3/8-inch radius is the correct size for softening tabletop edges and thick shelf edges. The main caveat: 3/8-inch radius creates a large, prominent profile -- not for thin parts.

Specs that matter

Key features

  • 3/8-inch radius
  • Micro-grain carbide
  • Bottom bearing
  • For tabletops and large edges
The trade-offs

Pros & cons

Pros

  • 3/8-inch radius is the correct size for softening tabletop edges and thick shelf edges
  • Micro-grain carbide maintains sharper edge than standard carbide formulations
  • TiCo carbide and Freud quality control produce consistent geometry
  • The most common large-radius roundover size for furniture work

Cons

  • 3/8-inch radius creates a large, prominent profile -- not for thin parts
  • Requires more router power than small-radius bits
Fit check

Should you buy the Freud 34-114 3/8-Inch Radius Rounding Over?

Think twice if this matters to you

  • 3/8-inch radius creates a large, prominent profile -- not for thin parts
  • Requires more router power than small-radius bits
Where it ranks

Featured in 1 best-of list

ListRank
Best Roundover Router Bit 2026· Best Large Radius#4 / 8
Cross-shop

Alternatives to the Freud 34-114 3/8-Inch Radius Rounding Over Bit

Products ranked near it in our research, each better for a slightly different buyer.

Buying advice: woodworking

  1. Clamps, a combination square, a good saw and a drill cover most beginner projects.
  2. You can never have too many. Bar clamps handle wide glue-ups; quick-grip clamps are fast for smaller work.
  3. Standard wood glue suits indoor projects. Water-resistant glue suits outdoor work and cutting boards.
  4. Oils are easy to apply and repair. Polyurethane and varnish protect tabletops and floors better.
  5. Eye and hearing protection and dust collection matter from the first project. Lay oily rags flat to dry to prevent fires.

Read the full guides

Answers

Freud 34-114 3/8-Inch Radius Rounding Over Bit: common questions

Is the Freud 34-114 3/8-Inch Radius Rounding Over Bit worth buying?

Yes, for the right buyer. The Freud 34-114 3/8-Inch Radius Rounding Over Bit ranks #4 in our Best Roundover Router Bit 2026 list (best large radius). Its biggest strength: 3/8-inch radius is the correct size for softening tabletop edges and thick shelf edges. The main caveat: 3/8-inch radius creates a large, prominent profile -- not for thin parts.

What are the downsides of the Freud 34-114 3/8-Inch Radius Rounding Over Bit?

The main trade-offs owners and reviewers point to: 3/8-inch radius creates a large, prominent profile -- not for thin parts; requires more router power than small-radius bits.

What are the key features of the Freud 34-114 3/8-Inch Radius Rounding Over Bit?

3/8-inch radius, Micro-grain carbide, Bottom bearing and For tabletops and large edges.

What are the best alternatives to the Freud 34-114 3/8-Inch Radius Rounding Over Bit?

Worth comparing: Freud 34-110 1/4-Inch Radius Rounding Over Bit, Freud 34-104 1/8-Inch Radius Rounding Over Bit and Bosch 85294M 1/4 In. x 1/2 In. Carbide Tipped Roundover Bit. Each ranks near it in our research for a slightly different buyer.

Where can I buy the Freud 34-114 3/8-Inch Radius Rounding Over Bit?

It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.

More woodworking shortlists

More like this

Other woodworking we recommend

All woodworking

Browse all research