MTM Hydro PF22 1.1 Pressure Washer Foam Cannon
- Pressure washer cannon
- 1.1mm orifice jet
Chemical Guys
Sponsored link · confirm price and availability on Amazon · updated
Yes, for the right buyer. The Chemical Guys ACC_326 Foam Blaster 6 Foam Wash Gun ranks #1 in our Best Foam Gun for Car Wash 2026 list (best overall). Its biggest strength: garden hose attachment means no pressure washer required - most users can use this immediately. The main caveat: lower foam density than pressure washer foam cannons.
Best foam gun for garden hose use. It stands out for garden hose attachment means no pressure washer required - most users can use this immediately and adjustable dilution - dial controls soap-to-water ratio for different soiling levels. The tradeoff: lower foam density than pressure washer foam cannons.
Pros
Cons
Buy it if you're…
Think twice if this matters to you
| List | Rank |
|---|---|
| Best Foam Gun for Car Wash 2026· Best Overall | #1 / 10 |
Products ranked near it in our research, each better for a slightly different buyer.
Read the full guides
Yes, for the right buyer. The Chemical Guys ACC_326 Foam Blaster 6 Foam Wash Gun ranks #1 in our Best Foam Gun for Car Wash 2026 list (best overall). Its biggest strength: garden hose attachment means no pressure washer required - most users can use this immediately. The main caveat: lower foam density than pressure washer foam cannons.
Based on our research it suits car wash 2026. It's ranked #1 of 10 in our Best Foam Gun for Car Wash 2026 list.
The main trade-offs owners and reviewers point to: lower foam density than pressure washer foam cannons; foam does not cling as long as pressure washer foam.
Works with garden hose - no pressure washer needed, Adjustable dilution ratio, Wide fan pattern and 1L solution bottle.
Worth comparing: MTM Hydro PF22 1.1 Pressure Washer Foam Cannon, Adam's Polishes Foam Cannon and Foam Blaster 6 Kit with 16oz Snow Foam Soap. Each ranks near it in our research for a slightly different buyer.
It's sold on Amazon. Prices and stock change often, so check the current listing before you buy, our link takes you straight to it.
The two-bucket method uses one bucket of clean soapy wash water and a second bucket of plain rinse water. After washing a panel of the car, you rinse the mitt in the clean-water bucket before reloading with soap from the wash bucket. This removes dirt from the mitt before reloading, preventing you from dragging dirty particles back across the paint surface. The primary cause of wash-induced swirl marks is skipping this step.
For a complete basic setup: two 5-gallon buckets with grit guards, one chenille microfiber wash mitt, one microfiber drying towel (at least 16x24 inches), car wash shampoo (pH-neutral), and a foam gun or foam cannon. A grit guard insert for each bucket keeps settled dirt from the bottom from being picked up by the mitt.